Audio-Technica Fully Manual 2-Speed Belt-Drive Turntable

Description

Electronic Express eBay Listing Description
Audio-Technica Fully Manual 2-Speed Belt-Drive Turntable
The AT-LPW30TKR is a fully manual, belt-drive turntable designed to give you optimal high-fidelity audio reproduction from vinyl. The two-speed (33-1/3 and 45 RPM) turntable features an aesthetically pleasing anti-resonance MDF (medium density fiberboard) plinth with simulated teak veneer to limit low-frequency acoustical feedback.
Key Features:
Fully manual, belt-drive operation with two speeds of 33-1/3 and 45 RPM
Fully Manual Operation
Adjustable dynamic anti-skate control
Professional anti-resonance, die-cast aluminum platter with rubber mat
AT-HS4 universal 1/2"-mount headshell and AT-VM95C Dual Moving Magnet phono cartridge with 0.6 mil conical stylus
AT-VM95C cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and applications
Straight tonearm with hydraulically damped lift control and lockable rest
Anti-resonance MDF (medium density fiberboard) plinth with teak simulated wood veneer
Built-in switchable phono pre-amplifier for phono or line-level output
AC adapter handles AC/DC conversions outside of the chassis, reducing noise in the signal chain
What's in the box:
Turntable Base
Dust Cover
Platter
Turntable Mat
Drive Belt
Counterweight
AT-HS4 Headshell
AT-VM95C Stereo Cartridge
45-RPM Adapter
RCA Audio Cable (approx. 3.3')
AC Adapter (approx. 4.9')
Dust Cover Hinges
Specifications:
Type:
Belt-drive manual turntable
Motor:
DC servo
Drive Method:
Belt Drive
Speeds:
33-1/3 RM, 45 RPM
Turntable Platter:
Die-Cast Aluminum
Wow and Flutter:
<0.15% WRMS (33 RPM) at 3 kHz
Signal-to-Noise Ratio:
>60dB
Output Level:
Pre-amp “PHONO”: 4 mV nominal at 1 kHz, 5 cm/sec
Pre-amp “LINE”: 200 mV nominal at 1 kHz, 5 cm/sec
Phono Pre-Amp Gain:
35 dB nominal, RIAA equalized
Power Supply Requirements:
100-240V AC, 50/60 Hz, 0.5 A Max.
Tonearm type:
Static balanced straight aluminum pipe tonearm
Effective arm length:
223.6 mm
Overhang:
18.6 mm
Tracking error angle:
<2 degrees
Applicable cartridge weight:
12-17 g
Stylus pressure adjustment range:
0-3 g
AC adapter:
12 V, 0.5 A
Replacement Stylus:
AT-VMN95C
Dimensions (WxDxH):
16.53" x 13.38" x 4.6"
Weight:
8.6 lbs.
Optimal High-Fidelity Audio Reproduction & Stylish Wood Turntable
A stunning addition to any system, the AT-LPW30TKR features an anti-resonance plinth with simulated teak wood veneer to limit low-frequency acoustic feedback.
Sophisticated Styling and Audio Aesthetics
The LPW30TK was designed to give you optimal high-fidelity audio reproduction from vinyl, with sophisticated styling.
Cartridge Assembly Line Circa 1962 & Over 55 Years of Analog Excellence
We got our start in Tokyo in 1962, designing and manufacturing high-performance phono cartridges. That half-century's worth of analog expertise goes into every turntable we produce, ensuring you get the best listening experience from your vinyl.