music hall MMF9.3 walnut Turntable/CFarm/0-cartridge/cover AUTHORIZED-DEALER

Description

WE ARE AN
AUTHORIZED
MUSIC HALL DEALER! 100-240v capable
WALNUT - INCLUDES EROICA LX MC CARTRIDGE
mmf-9.3 walnut turntable
THE MUSIC HALL MMF-9.3 WALNUT TURNTABLE IS A TWO SPEED, BELT DRIVEN AUDIOPHILE TURNTABLE EMPLOYING THE UNIQUE TRIPLE PLINTH CONSTRUCTION ORIGINATED BY MUSIC HALL. IT FEATURES A GORGEOUS AND CLASSIC-LOOKING WALNUT REAL WOOD VENEER FINISH.
distinctive design
The distinctive design isolates the critical sound reproducing components: platter, main bearing, tonearm, and cartridge, on the top platform, from the adjustable tip-toe feet and wiring, which are mounted on the bottom platform. The motor and speed controls are isolated on their own vibration damping base and completely decoupled from the turntable. Sorbothane hemispheres separate each of the three platforms and provide additional suspension and vibration damping.
our penultimate turntable
The mmf-9.3 walnut comes in a real wood walnut veneer finish and is available with or without a Goldring Eroica LX cartridge.
feature list
music hall’s unique triple plinth construction
classic-looking walnut real wood veneer finish
one-piece full carbon fiber tonearm
counterweight’s center of gravity is level with the stylus tip, is decoupled from the arm, and acts as a resonance damper
completely isolated/decoupled DC motor with 33 1⁄3 and 45 rpm speed controls located in the front left corner of the turntable, thus canceling any potential vibration from the motor/belt to the cartridge
motor sits on its own resonance damping puck
optional Goldring Eroica LX low-output moving-coil cartridge with Gyger II line contact stylus (5 value) - the cartridge supplied is properly aligned and mounted
inverted ceramic main bearing for super quiet, fluid operation
non resonant, 1” thick acrylic platter
soft felt platter mat
high quality gold RCA connectors and detachable phono cable
adjustable tip toe feet with anti scratch cups
low noise fully manual belt drive design
built-in round spirit level for proper leveling
dust cover and 45 rpm adaptor included
excellent instruction manual and easy assembly
The OPTIONAL Goldring Eroica LX Cartridge
The Eroica LX is a true audiophile moving coil cartridge which features an advanced pole shoe design using a powerful rare earth Neodymium magnet.
This unique construction allows a shortened magnetic path, which helps reduce the amount of iron in the record cartridge, keeping the weight down to just 5.5 g. Rigidity is also of prime importance and the Pocan body of the cartridge enables it to be clamped solidly to the headshell, keeping energy losses to an absolute minimum. This cartridge uses a Gyger II line contact stylus with a low output which means it must be used with an amplifier which features a dedicated moving coil phono input.
The Eroica LX offers an exceptionally high standard of performance and reliability.
Frequency Response
20 Hz – 22 kHz 2 dB
Channel Balance
within 1 dB @ 1 kHz
Channel Separation
better than 25 dB @ 1 kHz
Sensitivity
0.5mV 1dB, 1kHz @ 5 cm/sec
Static Compliance
30 mm/N
Dynamic Compliance @ 10 Hz
18 mm/N
Equivalent tip mass
0.35 mg
Vertical Tracking Angle
24°
Stylus Radius
Gyger II
Stylus Type
Non-Replaceable
Load Resistance
100 Ω
Load Capacitance
100 – 1000 pF
Internal Inductance
12 uH
Internal Resistance
8 Ω
Cartridge Mass
5.5 g
Cartridge Mass (inc fixings)
6.6 g
Fixing Centre
0.5″ (12.7 mm)
Playing Weight
1.5 – 2.0 g (1.7 g nom.)