-40%

Pro-Ject Xtension 10 Turntable, Mahogany Plinth, NEW Sumiko Cartridge, DEMO Unit

$ 2465.23

Availability: 87 in stock
  • MPN: Xtension 10
  • Brand: Pro-Ject
  • Model: Xtension 10
  • Condition: Like New Demo Piece! 9 out of 10
  • All returns accepted: ReturnsNotAccepted

    Description

    WHO WE ARE
    SkyFi Audio is a small startup business specializing in the purchase, reconditioning, and reselling of high end audio equipment. We only buy equipment that we admire and are passionate about. No mid-fi, no gimmicks, no junk.
    Each piece of equipment is cosmetically restored and fully tested in our well-equipped lab by an engineer with 30+ years of experience in the HiFi world. If it does not meet or exceed the original manufactures specifications, it will not be sold. We are very selective about the equipment we purchase, focusing on mostly analog, high-build quality, American, and European built units.
    Through our sister company, which is an authorized dealer for McIntosh, Audio Research, Sonus Faber, ClearAudio, Project, and Sony ES, we have access to OEM parts, service, and support.
    ----------
    This is a gorgeous Xtension 10 in a high-gloss Mahogany finish.
    This 'table was a demo unit and had an easy life. It show no signs of wear and is working like the day it left the factory. Best of all it wil come with a full manufacturers warranty (SkyFi is an official Pro-Ject Dealer).
    Included with your purchase is a brand new Sumiko Songbird MC (Moving-Coil) phono cartridge (9 value, not pictured). We'll take care of installing and calibrating the cartridge for you (a 9 Value) using our very detailed 11 step calibration process.
    More from Pro-Ject:
    The Xtension 10 shares much with its larger brother the Xtension 12. Designed to be smaller and with a 10″ tonearm, the Xtension 10 delivers nearly all of the 12’s performance in a more compact and less expensive package. Pro-Ject’s Xtension 10 incorporates over 20 years of experience in turntable design and manufacture. The Xtension 10 represents the latest technological efforts to address mass-decoupling and resonance reduction. Beginning with the mass-loaded magnetically floated sub-chassis and the precision balanced sandwich alloy platter (recycled vinyl/alloy), the foundation of this system weighs in at a super-heavy 48 lbs.
    Additionally, Pro-Ject employs magnetic decoupling feet to thwart airborne or mechanical vibration from disturbing playback. This mass and isolation creates an environment of extremely low resonance, allowing music to emerge from an ultra-silent black background. An AC motor with a two-step pulley drive with electronic speed control maintains perfect pitch and rhythm, resulting in inaudible wow, flutter and noise.
    Further reducing noise and vibration is the isolated Sorbothane mounting board for the 10″ carbon-fiber tonearm. The conical arm and unified headshell are fabricated from a single piece of carbon fiber to avoid problems associated with standing wave reflections. Single screw fixing of the armtube allows easy rotation for adjustment of needle azimuth.
    Great review from Mr. Fremer: "The Pro-Ject Xtension10 Turntable— More Than a "Lifestyle" Product!"
    "The Pro-Ject Xtension10 gives you a suspended mass-loaded turntable featuring a well-damped, attractive gloss-finished veneer plinth in a choice of three woods, a 12.5 pound alloy platter, a nicely done ceramic ball topped bearing, a built in quartz synthesized speed controller driving an A.C. synchronous motor, a 10” carbon fiber arm set in a high mass bearing housing featuring ABEC7 bearings and a dust cover. A good deal in my book."
    Item
    Included
    Original Box
    No
    Manual
    Online
    Remote
    Not Applicable
    Cables
    Yes - Power/Power Supply
    Physical Condition
    9
    Working Condition
    10
    ----------
    PURCHASING FROM SKYFI:
    This item will be professionally packaged and insured for safe transit to your home unless you opt for local pickup from our shop. Please note that all local pickup items are only wrapped with industrial strength clear cling stretch wrap if the original manufacturer packaging is unavailable.
    Local pickup is available in Glen Rock, NJ, just a half hour drive from Midtown Manhattan, with convenient parking near our building.
    If we don’t have the original manufacture’s packaging, we use heavy duty double-ply corrugated boxes with custom made to your item Instapak expanding foam custom inserts. In many cases this has proven to be better than the original packaging! We also use high quality fiber reinforced tape to seal our packages. Lightweight items will be bubble wrapped and shipped in a high-quality box.
    PURCHASING GUIDELINES:
    We do not accept or review any offers that do not go through the official eBay system. We have too many items for sale and it’s nearly impossible to keep track of offers outside of the official system. Please don’t message, email, or text any offers.
    TRADE IN POLICY:
    We accept trade-ins of equal or lesser value under certain conditions. Please visit our website to submit your gear for full consideration. We will only consider high-end equipment from mainstream manufacturers such as McIntosh, Mark Levinson, Audio Research, Krell, etc. and will typically pass on displays, projectors, receivers, dated surround processors, and mid-fi equipment of any type. We will offer a fair value for your equipment, but keep in mind we’re running a business and will need to be able to resell the equipment at a profit after investing a great deal of time and resources in testing, certifying, repairing, cleaning, and packaging the incoming equipment. If you’re looking for top dollar, we suggest selling direct on your own.
    SELL US YOUR GEAR (Working or Broken):
    We’ll also purchase your used or broken gear and arrange pickup if you’re in our local market. Simply visit our website to submit your gear for full consideration.
    SCHEDULING AN APPOINTMENT:
    We are currently operating from our shop inside our dedicated building in Glen Rock, NJ. You’re welcome to make an appointment if there’s a piece of equipment you’d like to see in operation before or after purchase. We have several well-equipped and dedicated listening areas, plus a dedicated listening studio with tons of equipment of all makes and models. We’re not a store, so please don’t make an appointment if you’re just curious as to how a speaker or piece of equipment sounds. In essence - no tire kickers please.
    You can message us here on eBay with any questions or to schedule an appointment. We can also arrange to install, calibrate, and tune your newly purchased gear in your listening room if you’re local to our area. This is super useful when purchasing large speakers or heavy amplifiers. It’s also great for ensuring your new turntable is setup correctly in its final resting place.
    eBay v1.2