Restored Thorens TD 125 MKII Turntable IN Black Orange

Description

Restored Thorens TD 125 MKII Turntable IN Black Orange
The description of this item has been automatically translated. If you have any questions, please feel free to contact us.
Individual production! Please note the processing time specified on Ebay!
Individual production! Please note the processing time specified on Ebay!
This turntable is available in 220V/ 50Hz or 110V/60Hz (
for example
USA)!
RESTORED by ART AND SOUND
Restored 125 MKII in black - orange metallic
Solid version 19kg
On request, an SME 3009 tonearm upgrade is also possible (surcharge)
Designer piece - design product - дизайнерский продукт
Our turntables are lovingly assembled, modified and assembled by hand.
Each of them is unique and differs in model, colour, veneer grain or other details.
The high-quality cases are restored or newly manufactured in qualified craftsmanship.
Electrical components are checked,
moving parts oiled and wearing parts replaced.
A final endurance test completes the complex work
.
The customer receives a top-class device.
revision work
Replacing the electrolytic capacitors, trimmers and ICs on the motor board
Board cleaned and contact tracks preserved
Adjusting the Wien-Robinson oscillator for speeds 16, 33 and 45
Power input board checked
Cleaning of all components
engine and Storage "Care"
Retune sub-chassis and suspension
Adjusting the tonearm and cartridge
Function test and trial run carried out
VDE safety test
Item description:
limit switch:
no
inner plate:
metal
Bearing mandrel:
10mm
basic dimensions:
Width: 52cm, depth: 41cm, height approx. 20cm
The case:
The housing consists of 40mm MDF side panels and a 16mm thick base made of the same material.
It is very complex with several layers of metallic paint
sealed and polished with appropriate intermediate cuts
. The connection panel for all required cable connections is located on the back.
The cover plate:
Cover plate made of 1mm aluminum, orange metallic paint
The spring pots:
The old plastic spring pots for correcting the suspension have been replaced with high-quality aluminum spring pots.
The pickup:
An Ortofon Vinyl Master Alpha is installed. With the VM series, Ortofon has long created the reference MM pickup, the long production time and the characteristic stylus body are well known all over the world. The VM Alpha is the entry into the series and is a super entry-level system for medium-priced turntables.
The VM series from Ortofon is compatible with each other. So you can start with a Super VM Alpha and then improve the quality with the appropriate needle insert by using the next needle insert.
The audio cable:
brand cable.
Ready-made analog audio cinch cable for wiring turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-nature signal transmission. Contact security and protection against corrosion is guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spatiality.
The turntable:
The turntable is made in five laborious and time-consuming steps
polished to a high gloss.
The mirror finish gives your turntable a unique look.
With surface sealing by a special protective coating against repeated tarnishing and for a long-lasting shine.
The device feet:
Chromed stainless steel spikes. So that the turntable is decoupled from low-frequency vibrations,
the chassis is equipped with height-adjustable spikes. Resonance and feedback are thus effectively prevented.
The drive belt:
The drive belt is new. It is manufactured to the original Thorens specifications (same material and dimensions).
The record weight:
Is made of degaussed stainless steel. With a weight of 310g, it ensures that the record lies flat on the platter and runs smoothly. This record weight plays in the middle "weight class. It adds just enough weight to dampen plate vibration without stressing the bushings. The suspension of the Thorens sub-chassis has been readjusted accordingly. By using it, you increase the sound performance of your system.
The following
parts
are
as
accessories
uh
right
rise
etc
daily
and
Not
component
this
auction
:
the
following
parts
are
available
like
accessories
other
not
included
in
this
auction
:
Hood
Cartridge MM including installation
:
Ortofon 2M Blue (elliptical, naked): €219
Ortofon 2M Bronze (fine line): €360
Ortofon Vinyl Master Silver (Fritz Gyger): €490
Cartridge MC including installation
: