Restored Thorens TD 145 MKII Turntable IN Piano Black

Description

Restored Thorens TD 145 MKII Turntable IN Piano Black
The description of this item has been automatically translated. If you have any questions, please feel free to contact us.
Individual production! Please note the processing time specified on Ebay!
Individual production! Please note the processing time specified on Ebay!
This turntable is available in 220V/ 50Hz or 110V/60Hz (
for example
USA)!
145 MKII
RESTORED by ART AND SOUND
Our turntables are lovingly assembled, modified and assembled by hand.
Each of them is unique and differs in model, color and veneer grain.
The high-quality cases are restored or newly manufactured in qualified craftsmanship.
Electrical components are checked,
moving parts oiled and wearing parts replaced.
A final endurance test completes the complex work
.
The customer receives a top-class device.
Item description:
limit switch:
Yes
inner plate:
plastic
Bearing mandrel:
7mm
basic dimensions:
Width: 45cm, depth: 36cm, height approx. 18cm
The case:
The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material.
It is very complex with several layers of high-gloss paint
sealed and polished with appropriate intermediate cuts
. The connection panel for all required cable connections is located on the back.
face plate:
Cover plate made of 1mm aluminum black anodized
The cartridge Ortofon Vinyl Master Alpha:
With the VM series, Ortofon has long created the reference MM pickup, the long production time and the characteristic stylus body are well known all over the world. The VM Alpha is the entry into the series and is a super entry-level system for medium-priced turntables.
The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next needle slot.
The audio cable:
brand cable!
Ready-made analog audio cinch cable for wiring turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-nature signal transmission. Contact security and protection against corrosion is guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spatiality.
The turntable:
The turntable is made in five laborious and time-consuming steps
polished to a high gloss.
The mirror finish gives your turntable a unique look.
With surface sealing by a special protective coating against repeated tarnishing and for a long-lasting shine.
Chromed stainless steel spikes (ATTENTION! different feet can be seen on the item photos):
So that the turntable is decoupled from low-frequency vibrations,
the chassis is equipped with height-adjustable spikes. Resonance and feedback are thus effectively prevented.
The drive belt:
The drive belt is new. It is manufactured to the original Thorens specifications (same material and dimensions).
New record weight made of stainless steel:
With a weight of 310g, it ensures that the record lies flat on the platter and runs smoothly. This record weight plays in the middle "weight class. It adds just enough weight to dampen plate vibration without stressing the bushings. The suspension of the Thorens sub-chassis has been readjusted accordingly. By using it, you increase the sound performance of your system.
--------
The following
parts
are
as
accessories
uh
right
rise
etc
daily
and
Not
component
this
auction
:
the
following
parts
are
available
like
accessories
other
not
included
in
this
auction
:
Cartridge MM including installation
:
Ortofon 2M Blue (elliptical, naked): €219
Ortofon 2M Bronze (fine line): €360
Ortofon Vinyl Master Silver (Fritz Gyger): €490
Cartridge MC including installation
: